MAX GRE A/B
Gasoline Resistant Epoxy System
For Fiberglass or Carbon Fiber Composite Gasoline Tank Fabrication
Use as an Impregnating Resin for Carbon Fiber and Fiberglass
Chemical Resistant Adhesive
Gasoline Resistant Repair for Metal Tanks and Composite Fuel Cells
Secondary and Containment Linings
AQMD Compliant 100% Solids Zero VOC (Volatile Organic Compound)
Or visit our eBay Store, PolymerProducts.
Available Kit Sizes:
Description
MAX GRE A/B is a two part hybrid-epoxy based resin system (Bisphenol A / Bisphenol F/ Novalac epoxy resin) formulated for gasoline resistance and other solvents of the same nature. It can be used as an impregnating resin for fiberglass, carbon fiber and other fabrics for fabricating composite fuel cells and tanks. MAX GRE A/B is resistant to sudden mechanical impact, cryogenic temperatures and resistant in electrostatic build up (triboelectric series or mechanical rubbing).
It can be used as a coating for metals, wood, concrete and other substrates to provide a high degree of chemical resistant barrier against petroleum solvents and liquid fuels. MAX GRE A/B can also be used as an adhesive for bonding composite structures that may come in contact with gasoline and other types of solvents and fuel compounds.
Physical and Mechanical Properties
Density | 1.10 G/CC |
Form and Color | Clear Liquid |
Viscosity | 2500-3000 cPs @ 25ºC Mixed |
Mix Ratio | 50 Parts “B” to 100 Parts “A” By Weight |
Working Time | 45 – 50 Minutes @ 25ºC(100 Gram Mass) |
Peak Exotherm | 70ºC (100 Gram Mass) |
Thin Film Set Time | 4 to 6 Hours |
Handle Time | 8 Hours |
Cure Time | 2 to 7 days @ 25ºC or |
Accelerated Cure Time | 8 hours at room temperature plus 1 hours at 100ºC |
Hardness | 80 ± 5 Shore D, |
Tee-Peel Strength | 3.4 Lbs. per inch Width |
Tensile Shear Strength | 2,935 psi @ 25ºC |
1,970 psi @ -40ºC | |
1250 psi @ 100ºC | |
Elongation | 3.0% @ 25ºC |
Flexural Strength | 13,000 psi |
Flexural Modulus | 344,000 psi |
Heat Deflection Temp. | 110ºC |
Chemical Resistance Performance
Full Immersion at 30°C
Measured Percent Change in Weight
REAGENT | 10 days | 28 days |
Deionized Water | 0.19 % | 0.13 % |
Sea Water | 0.11 % | 0.18 % |
Methanol | 3.93 % | -2.41 % |
Ethanol | 1.98 % | 1.28 % |
Toluene | 0.40 % | 2.86 % |
Xylene | 0.04 % | 0.05 % |
Gasoline (15% Ethanol contentE-85) | 0.10 % | .17 % |
MEK | Destroyed | Destroyed |
10% Lactic Acid | 1.81 % | 5.42 % |
10% Acetic Acid | 0.11 % | 0.45 % |
70% Sulfuric Acid | 0.08 % | 0.14 % |
50% Sodium Hydroxide | 0 % | 0.1 % |
10% Sodium Hypochlorite | 0.51 % | 1.36 % |